Product ID:QUICK DRY ENAMELS, 54-B, 54-310
MSDS Date:06/01/1990
FSC:8010
NIIN:00N026481
MSDS Number: CCRBY

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

INGESTION, EXCESS EXPOSURE TO A CORROSIVE

RTECS: 9999999ZZ

DETERMINE TYPE OF AIRBORNE CONTAMINANTS AGAINST

RTECS: 9999999ZZ

LEL BELOW STATED LIM, & TO REMOVE DECOMP PRODS DURING

RTECS: 9999999ZZ

ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 30-35%

OSHA PEL N/K

ACGIH TLV: N/K

PIGMENTS

Fraction By Weight: 15-20%

OSHA PEL N/K

ACGIH TLV: N/K

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM

CAS: 64742-88-7

Fraction By Weight: 2-5%

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL SPIRITS; (HYDROTREATED HEAVY NAPHTHA)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM

CAS: 64742-88-7

Fraction By Weight: 40-45%

OSHA PEL N/K

ACGIH TLV: N/K

XYLENE (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 2-5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 70-75%

OSHA PEL N/K

ACGIH TLV: N/K

SINCE OVEREXP ARE NOT EXPECTED, THERE IS

RTECS: 9999999ZZ

EYE WATERING, HDCH, NAUS, DIZZ & LOSS OF COORD ARE

RTECS: 9999999ZZ

ITCH, BURNING SENSATION & VISUAL DISTURBS MAY

RTECS: 9999999ZZ

REDNESS, AND SWELLING ARE CONDITIONS ASSOCIATED

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
SWALLOWED. EYE: SEV IRRIT. SKIN: MAY CAUSE MOD IRRIT. INHAL: VAP &
SPRAY MIST MAY BE HARMFUL IF INHALED. VAP IRRITATES EYES, NOSE, &
THROAT. RPTD EXPOS TO HIGH VAP CONC S MAY CAUSE IRRIT OF RESP SYS &
PERM BRAIN & NERV SYS DMG. INTENTIONAL MISUSE BY DELIBERATELY CONC
& (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: INHALING CONTENTS CAN BE
HARMFUL/FATAL. CHRONIC: AVOID LONG TERM & RPTD CONT. THIS PROD
CONTAINS TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE QTYS OF
TITANIUM DIOXIDE DUST IN A LONG-TERM STUDY DEVELOPED LUNG TUMORS.
POTENTIAL FOR INHAL OF TITANIUM DIOXIDE DUSTS FROM COATINGS IS VERY
LIMITED. (ING 8)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING,
FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER. INHAL: REMOVE TO
FRESH AIR. APP LY ARTF RESP & OTHER SUPPORTIVE MEASURES AS
REQUIRED. IF ANY OF THE FOLLOWING OCCUR DURING/FOLLOWING USE OF
THIS PROD, CONT POIS CTL CTR, EMER ROOM/MD IMMED. HAVE MSDS INFO
AVAIL. (ING 12)

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:0.8%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUP DAT)
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY MAY BE USED TO COOL
CLSD CONTRS TO PVNT PRESS BUILD-UP & (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CONTRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT (SUP DAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE/OTHER
ABSORB MATL & PLACE INT O CONTRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF THIS MATL IS PART OF A MULTIPLE COMPONENT COATING
SYS, READ MSDS FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS
THE RESULTING MIX MAY HAVE THE HAZS OF ALL OF ITS PARTS. CONTRS
SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL (SUP DAT)

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHST/FRESH AIR ENTRY. NIOSH APPRVD (TC-23C) PAINT
SPRAY/AIR SUPPLIED (TC-19C) RESPS MAY ALSO REDUCE EXPOS. READ RESP
MFR'S INSTRUCTIONS & L ITERATURE CAREFULLY TO (ING 13)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMITS, (ING 14)
Protective Gloves:NITRILE RUBBER, NEOPRENE RUBBER/PVA.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR PROT CLOTHING, INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA: CLASS II COMBUST LIQ FIRES. FIRE FIGHT PROC: POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZ PREF. EXPLO HAZ: SURF. TOX GASES MAY FORM WHEN PROD IS
CONTACTE D BY FLAME/HOT SURF. HAZ DECOMP PROD: FUMES INCL CARBON
MONOXIDE. OTHER PREC: OF LIQS IN EXCESS OF A FEW INCHES.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<3
Vapor Density:HVR/AIR
Spec Gravity:1.0-1.3
Evaporation Rate & Reference:<18 (BUTYL ACETATE=100)
Solubility in Water:<1%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN INGS SECTION
Percent Volatiles by Volume:<88

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME CUTTING ON SURF COATED W/THIS PROD
MAY PRDCE (SUP DAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.